Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

THORENS TD 204 (TP120) Walnut High Gloss

THORENS TD 204 (TP120) Walnut High Gloss


The THORENS TD 204 was developed for the audiophile beginner. A turntable with sound expansion potential for audiophiles.
The surface finishes “black high gloss” and “walnut high gloss” fit seamlessly into the existing range with the typical THORENS design. The brand identity is underlined by the high processing quality and guarantees a long life like all Thorens turntables.

The newly developed TP 120 tonearm impresses with its high-quality bearing technology. The bearing play and the coefficients of friction could be reduced to an astonishingly low level for the price class by using modern bearings. The TP 120 is a real 9″ J-shaped aluminum tonearm with an effective tonearm mass of 15 grams. The visual similarity to the larger models TP 150 and TP 124 is obvious and promises first-class properties.

The detachable headshell with SME connector is equipped with an AT95E from the Japanese pickup specialist Audio Technica. The skating compensation is carried out via a spring.

The connection terminal on the back shows high-quality RCA sockets for a solid connection to the amplifier. An integrated MM phono pre (which can be switched on/off) enables direct connection to a high-level input.

The platter, which is precisely manufactured from die-cast aluminum, is set in rotation by a precision drive belt. The plinth of the TD 204 rests on four vibration-damping feet.


• Smooth running belt drive
• Thorens TP 120 9” tonearm with J shape
• Detachable headshell with SME connector
• Switchable MM phono preamplifier
• Die-cast aluminum platter
• Pre-installed Audio Technics AT95E cartridge

SKU TD204GWlnt Category

Διαθέσιμο κατόπιν παραγγελίας

Χρειάζεστε βοήθεια?

Στείλτε μας email

Turntable section

Drive System: Belt Drive
Motor DC Motor: Speed 33 1/3 RPM, 45 RPM
Rotation Speed Variation: +/–2%
Wow and Flutter: 0.2%
Platter Aluminum: Die-cast
Diameter of Platter: 12“, 300mm

Tonearm section

Alumi tube
Type: Static Balance, J Type
Effective Arm Length: 9“, 232,8 mm
Stylus Pressure Range: 0 to 4g
Supported Cartridge Weight: 3.5 bis 6.0g
Overhang: 17,8 mm
Anti-skating Adjustment: Supported

Cartridge section

Type: MM type (Audio-Technica AT 95 E)
Stylus Construction: Bonded Diamond
Frequency Response: 20Hz to 20kHz
Channel Balance: 20 dB
Output balance: 2 dB
Vertical Tracking Angle: 20 degrees
Supported Load Impedance: 47k ohms
Output Voltage: 3.5 mV (1kHz, 3.54 cm/sec.)
Stylus Pressure: 2 g
Cartridge Weight: 5,7 g
Head-shell Weight: 10g (including Screws, Nuts and Wires)

Connector RCA: Pin jack (Gold-plated)
Power AC: 100 to 240V, 50/60Hz
Power Consumption: 1.5W (less than 0.5W at Standby)
Overall Dimensions: (W x D x H) 420 x 355x 121mm
Weight Approx: 4.8 kg

Στείλτε μας μήνυμα

και θα σας απαντήσουμε το συντομότερο δυνατόν.