MASS Satellite

• System Format: 2-Way
• Frequency Response (-6 dB): 105 – 34,000 Hz
• Sensitivity (1W@1M): 80 dB
• Nominal Impedance: 8 ohms
• Minimum Impedance: 4.4 ohms @ 300 Hz
• Maximum SPL: 98 dB (Pair)
• Power Handling (RMS): 30 W
• Power Handling (RMS) With Amplifier Crossover (150 Hz): 70 W
• Recommended Amplifier Requirements: 25 – 100 W
• Bass Alignment: Sealed Enclosure
• Crossover Frequency: 3.0 kHz
• Drive Unit Complement: 1 x 31/2″ (89 mm) MMP II Mid-Bass Driver, 1 x 3/4″ (19 mm) Soft Dome Tweeter
• External Dimensions (Including Grille and Terminals (H x W x D)): 147 x 122 x 107 mm
• Weight (each): 1.12 kg

MASS Subwoofer

• System Format: Sealed cabinet, 15 mm MDF construction with 18 mm base and front baffle
• Internally braced with sealed amplifier compartment
• Lower Frequency Limit: -3 dB @ 35 Hz / -10 dB @ 30 Hz (Free Field)
• Default preset: Music, -3 dB @ 34 Hz / -10 dB @ 25 Hz (In Room)
• Upper Frequency Limit: -6 dB @ 150 Hz
• Drive Unit Complement: 1 x 8″ (200 mm) MMP II subwoofer driver featuring a 2″ long throw voice coil
• Linear Driver Excursion: 15 mm Peak to Peak
• Amplifier Output: 120 W
• Amplifier Classification: Class D with high current Switch mode power supply (SMPSU)
• Phase Control: 0 Degrees & 180 Degree pure Invert
• Low Pass Filter Alignment: 2nd order (12 dB/Octave), from 50 Hz to 150 Hz
• Auto Sensing Input Requirements: Line Level >3 mV Auto Standby feature after 20 minutes
• Audio Input/Outputs: LFE unbalanced input RCA, Stereo unbalanced inputs RCA
• Connection: 12 V Trigger in (3.5 mm mono mini-jack, 4v threshold)
• Electrical Certifications: CE / CB/ ETL / Fcc / CCC/ ErP (Energy saving compliant)
• Mains Input Voltage: 100 – 240 Vac, 50/60 Hz
• Power Consumption: Maximum 130 W, Standby <0.5 W (ErP compliance)
• Fuse Type: 20 mm T8AL 250VAC
• External Dimensions (Including Amp, Drivers and Terminals (H x W x D)): 340 x 320 x 350 mm
• External Dimensions (Including Amp, Drivers, Terminals and Feet (H x W x D)): 359 x 320 x 350 mm
• Weight (unpacked): 10.2 kg