MARK LEVINSON № 526
MARK LEVINSON № 526
28,850.00€
DUAL-MONAURAL PREAMPLIFIER WITH PHONO STAGE AND HIGH-RES DAC
Unlock the full potential of your music collection
Discover new layers to the music you love with a high-end preamplifier that ensures you hear every note. The № 526 perfectly preserves both digital and analog signals, allowing you to experience the true character of your music, no matter its source.
Highlights
| Pure Path discrete, direct coupled, fully balanced, dual-monaural signal path |
|---|
| Discrete, balanced R-2R ladder volume control for precision and performance |
| Class-A Pure Phono stage with physically separated channels for MC and MM |
| 32-bit Precision Link DAC with three selectable filters and seven power supplies |
| Class-A Main Drive headphone output for up to 32-ohm headphones using main circuit |
| Supports high-resolution PCM (up to 32-bit, 192 kHz) and DSD (up to 5.6 MHz) |
| Selectable fourth-order, 80 Hz high-pass filter allows seamless integration of subwoofers |
| Designed and handcrafted in the USA |
Διαθέσιμο κατόπιν παραγγελίας
Χρειάζεστε βοήθεια?
Στείλτε μας email
support@ultimateaudio.gr
Καλέστε μας στο
+30 210 9949050
Φόρμα Επικοινωνίας
Πατήστε εδώ
No_ 526 SPECIFICATIONS
CONNECTIVITY
• ANALOG INPUTS: 2 balanced (XLR), 3 single-ended (RCA) line, 1 single-ended (RCA) phono w/ ground
• DIGITAL INPUTS: 1 balanced (XLR); 2 coaxial (RCA); 2 optical (Toslink); 1 USB-B
asynchronous
• ANALOG OUTPUTS: 1 balanced (XLR); 1 pair single-ended (RCA), 1 headphone
(¼”, 6.3mm TS)
• CONTROL CONNECTORS: Ethernet (RJ45), RS-232 (RJ12), Trigger In and Out, IR In, USB-A, Mini USB
ANALOG AUDIO PERFORMANCE
• LINE STAGE GAIN, NORMAL GAIN SETTING: 13.5dB balanced; 7.5dB single-ended
• LINE STAGE FREQUENCY RESPONSE, 20Hz TO 20kHz: ±0.02dB
• LINE STAGE FREQUENCY RESPONSE, 0.4Hz TO 370kHz: +0.1 / -3dB
• THD+N @ 1kHz (2VRMS SINGLE-ENDED OR 4VRMS BALANCED OUTPUT): < 0.003%
• SIGNAL-TO-NOISE RATIO (REF. TO 2VRMS SINGLE-ENDED OR 4VRMS BALANCED, MAX VOL): >115dB @ 1kHz
• CROSSTALK @ 1kHz: <-107dB
• CHANNEL SEPARATION: below noise floor (>115dB @ 1kHz)
• INPUT IMPEDANCE: >45kΩ
• OUTPUT IMPEDANCE: < 80Ω single ended, < 160Ω balanced
• MAXIMUM INPUT LEVEL, NORMAL GAIN SETTING: >10VRMS, single ended, >15VRMS, balanced
• MAXIMUM OUTPUT LEVEL: >11VRMS single ended, >22VRMS balanced
MAIN DRIVE HEADPHONE CIRCUIT
• HEADPHONE OUTPUT IMPEDANCE: selectable; < 3Ω or 75Ω
• HEADPHONE MAXIMUM OUTPUT, LOW IMPEDANCE SETTING, 30Ω (0.3W),
20 TO 20kHz, < 0.1% THD: >3VRMS
• HEADPHONE MAXIMUM OUTPUT, LOW IMPEDANCE SETTING, 300Ω, 20Hz TO 20kHz, < 0.1% THD: >9VRMS
• HEADPHONE THD+N, 20Hz TO 20kHz, 2V RMS: < 0.03% @ 30Ω, < 0.01% @ 300Ω
PHONO STAGE
• RIAA FREQUENCY RESPONSE: 20Hz to 20kHz, ±0.3dB
• INFRASONIC FILTER: defeatable, 15Hz, 2nd order (12dB/octave)
MOVING MAGNET MODE:
• INPUT RESISTANCE: 47kΩ
• INPUT CAPACITANCE: selectable; 50, 100, 150, 200, or 680pF
• GAIN: 40dB @ 1kHz
• THD+N, 20Hz TO 20kHz, 2VRMS OUTPUT: < 0.03%
MOVING COIL MODE:
• INPUT RESISTANCE: selectable; 20, 33, 50, 66, 100, 200, 330, 500, 1000, or 47kΩ
• INPUT CAPACITANCE: 50pF
• GAIN: selectable; 50, 60, or 70dB @ 1kHz
• THD+N, 20Hz TO 20kHz, 2VRMS OUTPUT: < 0.02%, 50 or 60dB settings,
< 0.04, 70db Setting
DIGITAL AUDIO PERFORMANCE
• DAC OUTPUT VOLTAGE @ FULL SCALE (0DBFS): 3.7VRMS
• DAC FREQUENCY RESPONSE: 20Hz to 20kHz, +0 / –0.2dB
• DAC THD, FULL SCALE (0DBFS): < 0.0001% @ 1kHz, < 0.0003% @ 20kHz
• DAC SNR (REFERRED TO 3.7VRMS / 0DBFS OUTPUT): >120dB (A-weighted)
• PCM SAMPLE RATES/BIT DEPTH: 32, 44.1, 48, 88.2, 96, 176.4, or 192kHz; up to 32 bits
• DSD: Native or DoP (DSD over PCM), single- and double-speed (2.8 and 5.6MHz)
A/C POWER
• MAINS VOLTAGE: 100VAC, 115VAC, or 230VAC, factory set
• POWER CONSUMPTION: 0.4W Green Standby, 5W Power Save, 72W Normal Standby, 75W On, idle
DIMENSIONS
Height (with feet): 3.75” (10.2cm)
Height (without feet): 3.25” (8.9cm)
Width: 17.25” (43.8cm)
Depth: 18” (45.7cm)
WEIGHT
Net weight: 41 lbs (17.7kg)
Shipping weight: 60 lbs (26.3kg)
