iFi Audio ZEN Can 3
iFi Audio ZEN Can 3
235.00€
Today the world is busy, fast, and full of noise. We know the power of music, and how it’s capable of taking you out of this world to someplace new. Somewhere tranquil, where melodies can uplift, and vocals can move you to tears.
The unrivalled clarity of the ZEN CAN 3 envelops you with raw, unadulterated emotion. Hear the crack of a voice, the crescendo of a chorus, the delicate whisper of a piano – every note and nuance is delivered with breathtaking precision. The ZEN CAN 3 ignites late-night listening sessions with its ability to effortlessly drive headphones – from xMEMS-based IEMs to high-end planars – delivering up to 2,000mW output power through the same Class A circuitry found in our flagship iCAN Phantom.
Isolate yourself from the chaos of the outside world with our all-new analogue EQ-modes, allowing for full immersion during intense gaming and movie marathons.
Available on backorder
Χρειάζεστε βοήθεια?
Στείλτε μας email
support@ultimateaudio.gr
Καλέστε μας στο
+30 210 9949050
Φόρμα Επικοινωνίας
Πατήστε εδώ
| Input Voltage | DC | 5V/2.5A |
| AC 100-240V, 50/60Hz | ||
| Analogue Inputs | SE RCA L/R | 2.0V nominal @ 0dBFS, 1MegOhm Zin |
| SE 3.5mm | 1.0V nominal @ 0dBFS, 1 MegOhm Zin | |
| BAL 4.4mm | 4.0V nominal @ 0dBFS, 24kOhm Zin | |
| Max Input Level | SE RCA | 3.8V RMS |
| SE 3.5mm | 1.92V RMS | |
| BAL 4.4mm | 7.4V RMS | |
| Headphone Output Section | ||
| Output Impedance | BAL 4.4mm HP | <2 Ohms |
| SE 6.3mm HP | <1 Ohm | |
| Headphone Output (RMS) | BAL 4.4mm | >11.5V/2,000mW (@ 64 Ohms) |
| SE 6.35mm | >7.2V/1,600mW (@ 32 Ohms) | |
| Headphone Output (Max.) | BAL 4.4mm | >15.1V/385mW (@ 600 Ohms) |
| >6.2V/1,200mW (@ 32 Ohms) | ||
| SE 6.35mm | >7.6V/98mW (@ 600 Ohms) | |
| >7.2V/1,600mW (@ 32 Ohms) | ||
| xMEMS | BAL 4.4mm | >21Vpp, 22 Ohms, 11V DC bias |
| SNR | BAL 4.4mm | ≥125dB (7.3V 4.4mm Input 0dB @ 600 Ohms) |
| SE 6.35mm | ≥122dB (1.9V Input 0dB @ 600 Ohms) | |
| DNR | BAL 4.4mm | ≥119dB(A) @ 0dBFS |
| SE 6.35mm | ≥119dB(A) @ 0dBFS | |
| THD+N | BAL 4.4mm | <0.006% (@ 360 mW/2.4V 16 Ohms) |
| SE 6.35mm | <0.006% (@ 100mW/1.27V 16 Ohms) | |
| Line Output Section | ||
| Output Impedance | <200 Ohms | |
| Output Level | 4Vrms (0dB 200kOhm load) | |
| SNR | ≥125dB (7.3V 4.4mm Input 0dB @ 200kOhm) | |
| DNR | ≥119dB(A) | |
| THD+N | 0.006% (0dB 200kOhm load) | |
| General | ||
| Gain | 0dB, 6dB, 12dB, 18dB | |
| Frequency Response | 10Hz-200kHz (-3dB) | |
| Power Consumption | No Signal | ~5W |
| Max Signal | ~13W | |
| Dimensions | 158x117x35mm (6.2×4.6×1.4”) | |
| Net Weight | 495g (1.09 lbs) | |
| Limited Warranty | 12 months* | |
| * 12 months typical or as permitted/required by local reseller laws. | ||
| **Specifications are subject to change without notice. |
