ELAC Miracord 50
ELAC Miracord 50
590.00€
Smooth vinyl precision. | ELAC Miracord 50 Turntable – MRC-501
ELAC’s Miracord 50 Turntable is designed to deliver exceptional vinyl transcription, inspired by the iconic Miracord name from the Golden Age of Stereo, when turntables reigned supreme. The Miracord 50 is carefully engineered with a belt-drive motor and die-cast aluminum platter. A precision static balanced, straight-tube tonearm with removable headshell features a factory-mounted MM phono cartridge. Designed with convenience in mind, the Miracord 50 is equipped with a built-in defeatable phono preamplifier, allowing you to add this turntable to virtually any music system.
Διαθέσιμο κατόπιν παραγγελίας
Χρειάζεστε βοήθεια?
Στείλτε μας email
support@ultimateaudio.gr
Καλέστε μας στο
+30 210 9949050
Φόρμα Επικοινωνίας
Πατήστε εδώ
Technical specifications
TURNTABLE
- Drive system: belt drive
- Motor: DC Motor
- Selectable speeds: 33⅓ and 45 rpm
- Rotation speed variation: +/- 1%
- Pitch Fluctuation: 0.1%
- Signal-to-noise ratio: -67 dB or better (A-weighted) -60 dB or better (unweighted)
- Platter: Cast aluminum
CARTRIDGE
- Type: Audio-Technica AT91 Moving Magnet
- Frequency Response: 20Hz to 20kHz
- Channel Separation: >18dB
- Channel equality: 2.5 dB
- Vertical toe angle: 20 degrees
- Load Impedance: 47kΩ
- Pad weight: 2.0 g +/- 0.5 g
- Pickup Weight: 5.0g +/- 0.5g
- Headstock weight: 11.0 g (including screws, nuts and cables)
TONEARM
- Design: Aluminum tube
- Tracking weight: 0 to 4.0 g
- Pickup Weight: 3.5-6.0g
- Arm effective mass: 27.4 g
- Overhang: 18.6mm
- Offset Angle: 25 degrees
- Anti-skating setting: 0…4
- Main bearing: stainless steel
PHONO PREAMP
- Type Moving Magnet: (MM)
- Phono output: 2.5 mV (1 kHz, 3.54 cm/sec)
- Line Out: 140mV (-17dBV)
OUTPUT: RCA incl. connection cable
OPERATING VOLTAGE: 100 to 240 V AC / 50 / 60 Hz
CONSUMPTION POWER: 1.5 W (less than 0.5 W in standby)
DIMENSIONS (H x W x D): 140 mm x 420 mm x 360 mm
WEIGHT: 5.5 kg (approx.)
