Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors
Generic selectors
Exact matches only
Search in title
Search in content
Post Type Selectors

CHARIO CONSTELLATION LYNX MkII (pair)

CHARIO CONSTELLATION LYNX MkII (pair)

1,989.00

The smallest bookshelf in the series, but expandable up to 67Hz. With a load volume of 1000cc, the Lynx will outperform many other larger and more expensive speakers. The Lynx is consistently regarded as better than its competitors in terms of sound production, fidelity and musicality.

The dynamics exceed most of the limitations of the standard bookshelf and are balanced and nuanced.

The customized rubber feet on the bottom of the cabinet structure helps to minimize vibrations by calibrating the surface-to-speaker distance to maximize the effectiveness of the low-frequency reflection system.

DESIGN IS NOT JUST WHAT IT LOOKS LIKE AND FEELS LIKE. DESIGN IS HOW IT WORKS.

The pressure that pushes the air inside the reflex duct is extremely high. Consider the analogy of hydraulic lines that push water upward. As the salt loses fluid pressure, the jets lose speed and weaken. Hence the goal must be to retain the optimal pressure within the reflex duct to ensure a consistent strength in the acoustic wave, while avoiding the audible noise past pressure speeds of 130km/h. The tweeter with a soft dome of 38 mm in diameter, without coolant iron in the air gap, and a “waveguide” support, make it at the same time precise but soft, natural but resolute. Above all, it is so chaste that it can withstand high sound pressures and very low crossover frequencies of the crossover filter, for the benefit of a higher tonal cohesion between the two transducers.

 Rigidity & Structure

The central part of the body is made of a resin and wood fiber material called HDF (High Density Fiberboard). Its mass and rigidity ensure the lowest vibration levels achievable with materials made from wood fibers.

The side panels are made from solid wood. This structure guarantees the necessary rigidity for vibration damping.The stand is designed to place the speaker at ear level for optimal listening.

Acoustics / House

This loudspeaker is designed to provide excellent performance even in typical home environments where acoustic performance is largely neglected. The ideal listening environment should be at least 6 square meters and no more than 14 square meters.

Διαθέσιμο κατόπιν παραγγελίας

Χρειάζεστε βοήθεια?

Στείλτε μας email

support@ultimateaudio.gr

Low Frequency Load 

Vented NRS

Configuration 

2 way Bookshelf

Drivers

1 Tweeter 38 mm Soft Dome Wave Guide

1 Woofer 130 mm Paper Compound

Sensitivity 

87 dB SPL / normalized to 1m / 2. 83 Vrms

decorrelated L/R

Pink Noise ITU-R BS 1116-1 compliant listening room

Low Frequency Cut Off

67 Hz @ -3 dB referred to C4 WETS

Crossover Frequency

1500 Hz – LKR 4th order

Rated Impedance 

Modulus 4 Ω (min 3.0) Argument ± 36°

Cabinet

Solid walnut and HDF.

Size & Weight

360 x 200 x 200 mm (H x W x D) / 10 Kg

Speakers Orientation 

Speakers should be tilted inward facing the listener

Listening Layout 

A carpeted floor in front of the speakers is recommended

Side and Back Walls 

Should be at least 1m away from the speaker front baffle

Suggested Amplifier

100 W/4 Ω Max Average Power

Στείλτε μας μήνυμα

και θα σας απαντήσουμε το συντομότερο δυνατόν.