TEAC TN-400BT-X Walnut
TEAC TN-400BT-X Walnut
529.00€
Analog turntable with Bluetooth® Qualcomm® aptX™ transmitter that streams music from LP Records wirelessly.
The TN-400BT-X is an analog turntable that also enables to playback LP records wirelessly via Bluetooth® headphones & speakers. A die-cast aluminium platter provides accurate rotational speed while an S-shaped static-balanced aluminum tone-arm provides accurate tracking. The built-in Phono EQ amplifier enables the TN-400BT-X to be connected to a conventional hi-fi audio system not having phono input.
A built-in Bluetooth® transmitter codec supports Qualcomm® aptX™ Adaptive. It enables to playback LP records with high-quality audio and low-latency via Bluetooth® headphones or Bluetooth® speakers supporting the Qualcomm® aptX™ Adaptive.
For convenience, a quality Japanese-made moving magnet-type cartridge comes pre-installed, so users can quickly start enjoying their records without a lengthy set-up procedure.
Διαθέσιμο κατόπιν παραγγελίας
Χρειάζεστε βοήθεια?
Στείλτε μας email
support@ultimateaudio.gr
Καλέστε μας στο
+30 210 9949050
Φόρμα Επικοινωνίας
Πατήστε εδώ
| Turntable section | |
| Type | Belt Drive |
| Motor | DC Motor |
| Rotation Speeds | 33-⅓, 45, 78 rpm |
| Wow-and-Flutters | 0.2% |
| S/N Ratio | more than 67dB (A-weighted) 60dB (unweighted, 20kHz, LPF) |
| Turntable (Platter) | |
| Material | Aluminum Die-cast |
| Diameter | 30cm |
| Tone-arm section | |
| Type | S-shaped, Static-balanced |
| Effective Length | 223mm |
| Needle Pressure Range | 0g to 5g |
| Compatible Cartridge Weight | 4g to 8g 14g to 18g (including Head-shell) |
| Head-shell and Cartridge sections | |
| Model of Cartridge | audio-technica AT95E |
| Type of Cartridge | MM-type (VM-type) |
| Frequency Response | 20Hz to 20,000Hz |
| Output Voltage | 3.5mV (1kHz, 5cm/sec.) |
| Channel Separation | 20dB (1kHz) |
| Output Balance | 2.0 dB (1kHz) |
| Needle Pressure | 1.5g to 2.5g (appropriate value: 2.0g) |
| Needle Life | approx. 300 hours (depends on conditions) |
| Coil Impedance | 2.8kohms (1kHz) |
| DC Resistance | 410ohms |
| Loading Resistance | 47kohms |
| Loading Capacity | 100 to 200pF |
| Coil Inductance | 400mH (1kHz) |
| Static Compliance | 20 × 10-6cm/dyne |
| Dynamic Compliance | 6.5 × 10-6cm/dyne (100Hz) |
| Needle Shape | Joint-oval 0.3 × 0.7mil |
| Cantilever | Aluminum Pipe |
| Vertical Tracking Degree | 20 degrees |
| Overall Dimensions | 17.0(W) × 17.2(H) × 30.5(D) mm |
| Weight | 5.7 g |
| Head-shell Weight | 10g (including nuts, screws, and wires) |
| Analog Output section | |
| Connectors | RCA jack × 1 pair (Gold-plated) |
| Output Voltage | |
| PHONO | 3.5mV +/-3dB |
| LINE | 155mV (-16dBV) |
| Bluetooth® section | |
| Bluetooth version | 5.2 (DUAL MODE) |
| Profile | A2DP |
| Codecs | SBC, Qualcomm® aptX™ audio, Qualcomm® aptX™ Adaptive |
| Operation Power | |
| AC Adapter Input | AC 100 – 240V, 50/60Hz |
| AC Adapter Output | DC 12V 500mA |
| Power Consumption | 1.5W or less |
| Standby Power | 0.5W or less |
| Dimensions (including protrusions) | 420(W) × 117(H) × 356(D) mm / 16.5″(W) × 4.6″(H) × 14.0″(D) |
| Weight | 4.9kg / 10.8lbs |
| Operating temperature range | 5°C to 35°C |
| Included Accessories | Felt Mat, EP Adapter, Counter Weight, Headshell (audio-technica AT95E installed), Platter, Dust Cover, Dust Cover Hinges × 2, RCA Audio Cable with GND wiring, AC Adapter (GPE053A-V120050-Z), Owner’s Manual (including Warranty Card) |
